Special Products
Maxit 4320
Description
Maxit ABS 4320 is a Commercial cementious, self leveling floor underlayment. This product is factory blended and it contains special cements, fibers, admixtures and sand. Maxit ABS 4320 is designed as a leveling product over Concrete, Stone, Tile or Wood. This product has to be covered with carpet, tile or vinyl.
Mixing
The product is mixed in a big bucket with a drill, for small repairs, with the automatic mixing pump for bags or with the silo including the silo mixing pump in bulk for large projects. Important: Always control the flow before starting the floor.
Prior to installation of the maxit ABS 4320, floor needs to be primed with the ABS 16 primer. After the primer has dried, application of the ABS 4320 can begin. Large open floors should be divided in smaller fields to assure that the maxit ABS 4320 does not dry before the floor is all level. Foot traffic in 2-4 Hours. Final floor covering in 3 days. Substrates: Concrete, Tile, Stone or Wood.
Coverage
When mixed with 1.0 Gallons of water (18%) one 55 lbs bag of maxit yields 33 sq ft at 5mm.
- Thickness Hand applied 2-50mm
- Pump applied 4-50mm/li>
Specifications
Maxit ABS 4320 Commercial Cement Floor:
| Test Results: | 7 days | 28 days |
|---|---|---|
| Flow: 120-130 mm | 3820 psi | 4060 psi |
| Shrinkage/ Expansion | ASTM C 157: 7 Days 0.05% 14 Days 0.05% 28 Days 0.05% |
- Flexural Strength ASTM C 78: 1160 psi
- Scaling Resistance: 30 Days none
- Wear resistance with rolling wheel: 10 times better than concrete
Note: Contains no casein or formaldehyde and has less emissions than concrete while creating a clean living environment.
